Saving your resources - Safeguarding the future

mpi

Modern Plan Insulation Ltd, Church Street, Westhoughton,
Bolton,   BL5 3QW

Tel:  01942 811839     Fax:  01942 812310

           E-Mail No: mpinsulations@btconnect.com

Web add: http://www.mpinsulations.com

 

ISOFOAM TEST RESULTS

 

Tests to BS 4370 : Parts 1-4 : 1988

 

 

 

                                                                           

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*       

 

This is a small scale laboratory test and should be used for comparative purpose. It is NOT to be used to assess the potential fire hazard of a material in use.

 

 

****************************

 

 

The above physical properties have been obtained on the foam produced from injecting CRF into a test cavity wall with a cavity width of approximately 55mm.  The test wall had a brick outer leaf and a block inner leaf.

 

The foam system was injected through holes drilled in the outer leaf using a Gusmer FF proportioner fitted with a model D gun.  The holes were drilled at 3 brick centres horizontally and 5 brick centres vertically using a staggered drilling pattern.

 

The physical properties obtained when making different items using alternative conditions than those detailed above may vary, and should be determined for the intended application.

Back to CRF

Back to products